RAUKANTEX applicator

Description

Description

The RAUKANTEX applicator is suitable for applying edgeband coated with hot melt adhesive. It can be used from the right and the left, for coating both a right and a left corner. There is a guide shoe located at the point the edgeband exits the unit. This positions the edgeband at the right height to the board. There is also a pressure pin fitted to this guide shoe that ensures that pressure can be applied directly into the corner. This enables a secure bond to be achieved between the edgeband and the board. An edgeband guide is fitted where the edgeband is fed in. This guide is adjusted to the width of the edgeband.

Advantages

Advantages

  • Gluing the edgeband especially in the 90° inner corner
  • Simple, problem-free and precise gluing

Technical Data

Technical Data

  • Can be used for all conventional types of edgeband material
  • Suitable for edgeband materials with metal coatings or inserts

Edgeband width: From 10 mm to 56 mm
Edgeband thickness: From 0.8 mm to 3 mm