Edgebanding: Cutting flush

Festool scraper ZK HW 45/45

The Festool ZK HW 45/45 scraper is a useful tool for cleaning away the remaining overhangs after milling plastic edgeband without damaging the work surface.

It can smooth out impact marks left by cutters during the milling process, break edges and affix/clean curves. The tool can be guided perfectly smoothly thanks to the attached cord. This scraper is made of solid carbide for greater durability and resistance to wear.


  • Versatile tool for cleaning away excess material after milling
  • Polish impact marks from cutters (radii R1, R1.5 and R2 mm)
  • Break edges, affix curves and clean thin plastic edges and inclined edges/mitred edges (radii R1, R1.5 and R2 mm)
  • Can be guided perfectly smoothly thanks to the attached cord
  • Solid carbide for greater durability and low wear

RAUKANTEX flush cutter

The RAUKANTEX cutter can be used to easily cut the upper and lower edgeband overhangs to be flush on straight and curved panel contours. This tool can also remove adhesive residues, in the same way as a flat scraper. The RAUKANTEX cutter is easy and quiet to use.


  • Removes adhesive residues (similar to the flat scraper)
  • Easy to handle
  • Low noise

Technical data

  • Can be used for all standard edgeband materials (except PMMA)
  • Also suitable for edgeband materials with metal coatings or inserts with a maximum protruding edge of 1.5 mm
  • Edgeband width: 19 to 45 mm
  • Edgeband thickness: max. 2 mm

Included in: RAUKANTEX cutter set

Replacement parts: Spare blade (article number: 12478671001)


PP, ABS or PVC RAUKANTEX edgebands can be finished easily and effortlessly using the RAUKANTEX cutter set. Cutting away overhanging edgeband from straight contours as well as internal and external radii is no longer a problem.


  • RAUKANTEX cutter
  • RAUKANTEX external and internal planes
  • Two 2 mm scrapers

Festool KB-KA 65 sys edgebanding set

The comprehensive Festool KB-KA 65 SYS edgebanding set in conjunction with the CONTURO KA 65 edgebanding machine helps ensure edgebands are applied perfectly for a flawless finish.


  • Edgeband magazine
  • Additional roller
  • Guillotine
  • Scraper
  • Scratch protector with three felt pads
  • HSK 80x133 sanding block
  • 5x polishing felt pads
  • 20x StickFix BR2 80x133 P320 sanding pads
  • 5x StickFix S 800 sanding pads
  • MPA 6000 polishing agent

Products required

  • Festool CONTURO KA 65 edgebanding machine