Vertical systems

Mechanisms for vertical systems


Vertical brake

Vertical brake

  • Double function as a slam-rail glide especially for small cabinets
  • Braking the run of the tambour door when opened and closed
  • Braking effect can be adjusted for both sides individually
Caddy brake

Caddy brake

  • Used in wooden cabinets with recessed or surface-mounted running tracks and spirals
  • Patented brake module for direct installation (no balancing mechanism)
  • Easy assembly requiring minimal preparation
  • Opens from top to bottom
  • Can be adjusted from outside in a finished cabinet
  • One brake per cabinet is sufficient. If necessary, a second brake can be fitted opposite (on request)
  • A lock must be fitted
C6 vertical balancing mechanism

C6 vertical balancing mechanism

  • Used in wooden cabinets with recessed or surface-mounted tracks and direction of travel into the rear wall
  • Active balancing mechanism for opening from bottom to top
  • Simple solution taking up minimum space in the cabinet
C8 counterbalance mechanism

C8 counterbalance mechanism

  • Wide range of applications
  • Active counterbalancing of the tambour door in almost any opening position
  • Minimum space required as it is fitted on the rear of the cabinet
  • Can be retrofitted to completed cabinets from the outside
C3 installation kit, C3 roller mechanism

C3 installation kit, C3 roller mechanism

  • Convenient running properties
  • Optimum counterbalancing of the tambour door by high-quality spring shaft mechanism
  • Minimum space required for all cabinet heights due to the guide roller and bale winding principle
  • Up to six shelves high
  • Extension for increased flexibility in terms of width from 350 to 1184 mm carcass inside width
C-box cassette system, C3 coiled

C-box cassette system, C3 coiled

  • Spiral track or roller mechanism (C3 coiled) is used, depending on the application
  • Complete pre-assembled system
  • Straightforward assembly and foolproof installation
  • Simply screw module and accessories together in the carcass
  • C-box with roller mechanism (C3 coiled) available as ready-to-install standard set, or customisation can be planned using the tambour door configurator
  • C-box with spiral track available only as ready-to-install standard set
  • Track system required for C3 coiled and spiral