Mechanisms & track systems

Mechanisms & track systems

With our tambour door systems you can choose between rear or side-wall (spiral) track systems for horizontal cupboards. And when it comes to vertical models, you can take your pick from seven different mechanisms.

Track systems

Whether it’s front-mounted, milled or surface-mounted, choosing the right track system can make all the difference. With REHAU, you’re bound to find the right one for you.

CLASSIC track system

CLASSIC track system

  • Classic track system
  • Recessed running 
TOP BASIC track system

TOP running track

  • Easy to install
  • No milling, just cut into lengths and screw in place
  • Suitable for retrofitting
  • No visible transition between the track/spiral/90° corner – for a high-quality, seamless look
  • Aluminium tracks


TOP BASIC track system

TOP BASIC track system

  • Easy to install
  • No milling, just cut into lengths and screw in place
  • Can also be retrofitted
  • Track system in solid colours
frame4 track system

frame4 track system

The frame4 track system comes in a design that matches RAUVOLET metallic-line tambour doors. Just 4 mm wide, it frames the mat in an elegant metal finish, so that a plain surface becomes an even more prominent, optically striking element. The track system is available in fine aluminium or stainless steel finishes.


Mechanisms

For vertical cupboards, a reliable, well-designed running mechanism makes all the difference, offering maximum safety and ease of use. REHAU can supply a complete kit for quick, efficient installation

C3 installation kit, C3 roller mechanism

C3 installation kit, C3 roller mechanism

  • Convenient running properties
  • Optimum counterbalancing of the tambour door with high-quality spring shaft mechanism
  • Minimum space required for all cabinet heights due to the guide roller and bale winding principle
  • Up to six shelves high
  • Extension for increased flexibility in terms of width from 350 to 1184 mm carcass inside width
C-box cassette system, C3 coiled

C-box cassette system, C3 coiled

  • Spiral track or roller mechanism (C3 coiled) is used, depending on the application
  • Complete pre-assembled system
  • Straightforward assembly and fool proof installation
  • Simply screw module and accessories together in the carcass
  • C-box with roller mechanism (coiled C3) available as ready-to-install standard set. Also customisable using the tambour door configurator
  • C-box with spiral track available as ready-to-install standard set only
  • Track system required for coiled C3 and spiral tracks

Engineering progress

Enhancing lives

CONTACT & SERVICES