Mechanisms & track systems

Mechanisms & track systems

With our tambour door systems you can choose between rear or side-wall (spiral) track systems for horizontal cupboards. And when it comes to vertical models, you can take your pick from seven different mechanisms.

Track systems

Whether it’s front-mounted, milled or surface-mounted, choosing the right track system can make all the difference. With REHAU, you’re bound to find the right one for you.

CLASSIC track system

CLASSIC track system

  • Classic track system
  • Recessed running track
FLEX track system

FLEX track system

  • New design options for plenty of creative ideas
  • Flexible, recessed running track
  • Any external radius in a positive running direction
  • Minimum internal radius Ri = 35.5 mm
  • A (spiral) side retainer can be retrofitted, bearing in mind Ri = 35.5 mm
  • Running track can be cold-bent by hand
TOP BASIC track system

TOP running track

  • Easy to install
  • No milling, just cut into lengths and screw in place
  • Suitable for retrofitting
  • No visible transition between the track/spiral/90° corner – for a high-quality, seamless look
  • Aluminium tracks


TOP BASIC track system

TOP BASIC track system

  • Easy to install
  • No milling, just cut into lengths and screw in place
  • Can also be retrofitted
  • Track system in solid colours
FRAME track system

FRAME track system

  • Impressive frame-look design
  • Easy to install
  • No milling, just cut into lengths and screw in place
  • Standard front design for horizontal and vertical cabinets
  • Protruding track system (19 mm) appears flush to standard hinged doors
  • Aluminium running tracks
frame4 track system

frame4 track system

The frame4 track system comes in a design that matches RAUVOLET metallic-line tambour doors. Just 4 mm wide, it frames the mat in an elegant metal finish, so that a plain surface becomes an even more prominent, optically striking element. The track system is available in fine aluminium or stainless steel finishes.


Mechanisms

For vertical cupboards, a reliable, well-designed running mechanism makes all the difference, offering maximum safety and ease of use. REHAU can supply a complete kit for quick, efficient installation.

Vertical brake

Vertical brake

  • Double functions as a slam-rail glide, especially for small cabinets
  • Brakes the run of the tambour door when opening and closing
  • Braking effect can be adjusted for both sides and individually
Caddy brake

Caddy brake

  • Designed for use in wooden cabinets with recessed or surface-mounted running tracks and spirals
  • Patented brake module can be installed immediately (with no need to counterbalance)
  • Easy assembly with minimal preparation
  • Opens from top to bottom
  • Can be adjusted from outside in a finished cabinet
  • One brake per cabinet is sufficient. If necessary, a second brake can be fitted opposite (on request)
  • A lock must be fitted
C6 Vertical counterbalance mechanism

C6 Vertical counterbalance mechanism

  • Used in wooden cabinets with recessed or surface-mounted tracks and direction of travel into the rear wall
  • Active balancing mechanism for opening from bottom to top
  • A simple solution that takes up minimal space in the cabinet


C8 vertical counterbalance mechanism

C8 vertical counterbalance mechanism

  • Suitable for a wide range of applications
  • Active counterbalancing of the tambour door in almost any opening position
  • Minimum space required as it is fitted on the rear of the cabinet
  • Can be retrofitted to completed cabinets from the outside
C3 installation kit, C3 roller mechanism

C3 installation kit, C3 roller mechanism

  • Convenient running properties
  • Optimum counterbalancing of the tambour door with high-quality spring shaft mechanism
  • Minimum space required for all cabinet heights due to the guide roller and bale winding principle
  • Up to six shelves high
  • Extension for increased flexibility in terms of width from 350 to 1184 mm carcass inside width
C-box cassette system, C3 coiled

C-box cassette system, C3 coiled

  • Spiral track or roller mechanism (C3 coiled) is used, depending on the application
  • Complete pre-assembled system
  • Straightforward assembly and fool proof installation
  • Simply screw module and accessories together in the carcass
  • C-box with roller mechanism (coiled C3) available as ready-to-install standard set. Also customisable using the tambour door configurator
  • C-box with spiral track available as ready-to-install standard set only
  • Track system required for coiled C3 and spiral tracks

Downloads


Tambour door configurator

Configure your customised, ready-to-install tambour doors with just a few clicks.

Start configurator

Contact

Do you have any questions? Call our free expert hotline or fill in the contact form.

Contact us


Engineering progress

Enhancing lives

Contact & services