Energy Efficiency

Save Energy

Save Energy

Using REHAU windows can not only improve the overall look of a property but also helps to save energy. Heat loss through buildings can be reduced by fitting new, more energy efficient windows.

With the rising cost of fuel, not to mention reducing your carbon footprint, the issue of energy efficiency is an important factor to consider. REHAU windows have very good thermal insulation properties which can significantly reduce heating and cooling bills. By retaining heat for longer within the property, heating times can be cut and this, in turn, will result in reduced carbon emissions from burning less fuel.

Building Regulations

Building Regulations

REHAU UPVC windows conform to SAN2 204.

Window Energy Ratings

Window Energy Ratings

Window Energy Ratings or WERs show the windows’ thermal performance by means of an alphabetical grade from A to G with A being the best and C being a minimum requirement in order to satisfy building regulations, although not a compulsory one.

When purchasing an energy rated window, the window should be provided with a label stating the rating (see picture 2), to confirm that it has been manufactured to meet all the criteria required by a WER scheme.

The WER rating for a window is derived by a combination of the amount of heat lost - the U value, its’ air tightness around the seals and its ability to gain heat energy from the sun.
The calculation gives the window an energy index score which is then translated into an alphabetical rating.

REHAU window systems can easily achieve A ratings when used in combination with the appropriate glazing unit.

U-Values

U-Values

One of the main benefits of replacing old windows is to improve the thermal performance. The choice of which window is best in this area can be confusing as the technical information regarding the performance of the window is not always fully explained.

U values measure the amount of heat energy that is lost through the window. The lower the value, the less heat is transferred, making it a more energy efficient window. The U value for the whole window should be provided which means the frames and glazing units need to be calculated together to give an overall value.

REHAU windows can accommodate a large array of glazing units which include the most efficient triple glazed insulated units which can give complete control over the amount of insulation you require from your windows.