REHAU Wood Working Accessories

RAUKANTEX tools give you innovative solutions for every stage of the edging process.

KM08R Portable edgebander + box

KM08R portable edgebander is compact and lightweight machine suitable for factory or on site processing.
This unit can be used in various format such as hand held edgebander, converting to table edgebander by mounting it to a working table or as simple as using it right out of the box where a small platform is integrated for processing of smaller panels.

It has a fixed feed speed of 4m/min for easy handling and suitable for edgeband, 0.5 mm to 3.0 mm in thickness and 10 mm to 40 mm in width.

FR 256 R Power Edgeband Router

FR 256R power edgeband router trim edge band effortlessly with its powerful motor (750 W) and electronic speed adjustment. The electronic control maintain a speed constant independently than the working load. Dust collector connection and three bases (hole Ø 20, 26 and 30 mm) for using with bits of different diameters. Standard units are equipped with a carbide bit r=3 mm with bearing with optional bits are available for several different radius.

RC 21 E Manual End Trimmer

It allows a perfect, clean and high quality cut on all the corners of the board. No other finishing operations are needed. 
Equipped with twin use blades. For trimming PVC, melamine, Polyester, veneer, etc. up to 0.8mm thickness. 

Optional accessories:
Spare blades

RC 321S Guillotine

For cutting the excess of PVC, melamine, polyester, veneer, etc. tapes up to 45 mm width and 3 mm thick at both ends of panel. It provides a clean and exact cut, avoiding to damage the panel already banded. The guillotine system allows to cut the tape without effort. The blades can be sharpened. Possibility to regulate the cutting position. It enables precise angular cutting up to 60º. 

Spare blades:

  • Movable blade
  • Fixed blade

AU 93 Manual Edge Trimmer

Cuts both sides simultaneously. For edges up to 40 mm. For larger edges, it can be used as two independent edge trimmers. 
Top quality long life blades which are easy to replace once worn.

Optional accessories
Spare Blades

SFV 150 Vacuum Table

The vacuum table SFV50 is ideal for a quick fastening of the panel.
One clamp screw is included as standard equipment to fix the table to the workbench. It is an efficient system to hold the panel and work in a comfortable way on all its edges. The vacuum table must be used with clean, smooth and non porous panels only. It is possible to hold panels in horizontal or vertical position. Using several vacuum tables it is possible to hold larger panels.


You can use RAUKANTEX Foliex to remove protective foil quickly and easily from any edgeband.

RAUKANTEX Foliex is exceptionally easy to use, and requires minimal physical strength.

RAUKANTEX flush cutter

Using the RAUKANTEX flush cutter is the easy way to cut the excess off the upper and lower edgebands so they sit flush on straight or curved panel contours. It can also be used just like a flat scraper to remove adhesive residues. The RAUKANTEX flush cutter is easy to use and virtually silent.

Key features:

  • Removes adhesive residues (similarly to a flat scraper)
  • Easy to use
  • Low noise

Technical data:

  • Can be used to work on all standard edgeband materials (except PMMA)
  • Also suitable for edgeband materials with metal coatings or inserts (maximum protruding edge 1.5 mm)
  • Edgeband width: 19 to 45 mm
  • Max. edgeband thickness: 2 mm

RAUKANTEX external and internal planes

Once you’ve used the RAUKANTEX cutter to make sure the edgeband sits flush against the panel, you can use the RAUKANTEX external and internal planes to attach radii to straight sections, or to affix external/internal radii to the contours of the panel. These planes can also be used to remove chatter marks caused by using a surface grinder.

Key features:

  • Removes chatter marks caused by using a surface grinder
  • Easy to handle
  • Low noise

Items available:

  • RAUKANTEX cutter set
  • Spare parts: 2 mm/3 mm flat scrapers (Item numbers: 12478771001 / 12478171001)

Technical data:

  • Can be used to work on all standard edgeband materials (except PMMA)
  • Height of scraper can be adjusted to the required radius
  • Pre-milling required with the manual router for 3 mm radii.
  • Edgeband width: any
  • Edgeband thickness: 2 mm or 3 mm (depending on the scraper used)


With the RAUKANTEX cutter set, finishing RAUKANTEX PP, ABS or PVC edgebands is simple. Cutting away overhanging edgeband from straight contours as well as internal and external radii is no longer a problem.


  • RAUKANTEX cutter
  • RAUKANTEX external and internal planes
  • Two 2 mm scrapers


After milling radii with the RAUKANTEX external or internal planes, use the RAUKANTEX finisher.

The tool’s special mixture of sisal and textile fibres makes it ideal for smoothing edgebands, removing any tell-tale signs of processing, and cleaning away any extraneous material.

RAUKANTEX flap wheel

The RAUKANTEX flap wheel is used when there are sharp edges that need to be smoothed or rounded, for e.g. after processing with the RAUKANTEX cutter set or on special parts. Rounding and polishing gives the edgeband an immaculate, sophisticated look.

During this process excess adhesive residue is also removed, without damaging the edgeband’s decorative design or the surface of the panel. The flap wheel can be attached and used on any commercial drill.


  • Smooths and polishes for a high-end, immaculate-looking finish
  • Can be used for all standard edgeband materials
  • Adhesive residue is removed without damaging the material
  • High-performance, precise, high-quality

Glue applicator

Glue applicator is for smooth and uniform application of glue.

  • Main unit - ABS
  • Base stand
  • 1 set with roller, plus one spare roller
  • Roller width: 150 - 122 mm

REHAU Masking Tape

Superior quality adhesion

General purpose masking tape
The robust tape for everyday jobs, REHAU masking tape can be used on almost all surfaces and gets removed easily without leaving any residue. It can be used at all workplaces and job sites. REHAU masking tape is a cost effective and pressure sensitive product that holds and seals perfectly, providing superior quality adhesion for 14 hours .


  • Wide range of applications
  • Masking, splicing, bundling and packaging
  • Conforms to all surfaces
  • No residue transfer on removal

Sizes available:

  • Width 18 mm and 24 mm
  • Length 20 m and 40 m

RAUBOND Adhesives - Water-based adhesives for Retail

RAUBOND presents a range of water-based adhesives, comprising Champ, PolyMaster and Rapid-X. These adhesives are suited for various applications. Being a multi-purpose adhesive, RAUBOND Champ is perfect for manual pressing and laminating applications, including hot press and cold press. RAUBOND PolyMaster is ideally used for PVC edge banding, along with pasting plywood to acrylic sheets, PVC sheets and charcoal sheets. With its fast setting application, RAUBOND Rapid-X is used in marine ply, marine laminate, finger jointing and laminating applications (hot press, cold press and roller press).
Packs available in (kg) : 1/2, 1, 2, 5, 30 and 50.


  • PVC edge banding
  • Plywood to acrylic, PVC and charcoal sheets
  • Wood to wood adhesive
  • HPL to plywood
  • Finger jointing
  • Critical wood applications

Water-based adhesives for OEM
RAUBOND also offers a range of water based adhesives exclusively for OEMs: WudTite, WudTite Pro and Swift. RAUBOND WudTite is a multipurpose adhesive that instantly bonds with surfaces. RAUBOND Swift is a waterproof adhesive prepared with a termite resistant formula, ideal for applications requiring fast setting. RAUBOND WudTite Pro is
crafted with an anti-bubble formulation which makes it perfect for critical wood applications and vertical pasting.

RAUBOND Adhesives - Hotmelt adhesives

RAUBOND offers a range of hotmelt adhesives recommended for use with manual and through-feed machines over a temperature of 120-200°C. Additionally, low temperature adhesive is also available for processing thin edgebands.


  • Grades available for through-feed, semiautomatic and manual edgebanding machines
  • Excellent melting properties
  • Excellent adhesion for bonding PVC, wood veneer, PP and ABS
  • No stringing
  • European quality
  • High thermal resistance
  • Medium viscosity
  • High green strength

To be used in manual and automatic ending machines for strong adhesion between the substrate and:

  • Veneer
  • Resinated paper edges
  • PVC
  • Polyester
  • ABS
  • Melamine resin edges and heart-wood

RAUBOND hotmelt variants:

  • Techpro Clear 6768
  • Techpro 545/15
  • Techplus 580/15
  • Techfix 544/15
  • Techmanual Clear 6765
  • Techmanual 6723/15

Engineering progress

Enhancing lives


Maximum cart size of 3 items has been reached!

Your sample cart items: