Hydraulic Bicycle Hoses

Description

Hydraulic Bicycle Hoses
Hydraulic Bicycle Hoses

Description

First class brake systems require first class components!

Cycling has developed over the past few years from a classic hobby into an endurance sport with an increasing requirement for high quality equipment.

Modern hydraulic bicycle disc brake systems must therefore ensure a tremendous braking effect is achieved even when low manual force is applied.

REHAU manufactures and supplies mini hydraulic hoses in the dimensions 2.0 to 2.5 mm (internal diameter) and 4.9 to 5.6 mm (external diameter) fit for this purpose.

In addition to our small-dimensioned high pressure, hydraulic hoses for bicycle disc brakes, REHAU also supplies non-reinforced PA mono-pipes for high quality, pneumatic caliper brakes.

Further details on the complete Hydraulic and High Pressure hose range is found in our brochure.

Advantages

Hydraulic Bicycle Hoses
Hydraulic Bicycle Hoses

Advantages

  • High flexibility
  • Extreme pressure resistance
  • Small internal and external diameter
  • Low weight
  • Small bending radii
  • Low diffusion behaviour (barrier effect)
  • Resistant to oil
  • Operating pressure > 100 bar (Burst pressure > 1,000 bar)
  • Customer-specific requests are possible

Further details on the complete Hydraulic and High Pressure hose range is found in our brochure.

Materials

Hydraulic Bicycle Hoses
Hydraulic Bicycle Hoses

Materials

  • RAU-PA (Polyamide)
  • RAU-TEL (Polyether esterelastomer)
  • RAU-PE (Polyethylene)
  • RAU-PUR (Polyurethane; also in microbe-stabilised)
  • Polyester filament or aramide yarn as pressure reinforcement

Further details on the complete Hydraulic and High Pressure hose range is found in our brochure.